Showing posts with label emerger. Show all posts
Showing posts with label emerger. Show all posts

Monday, March 11, 2013

Batwing BWO emerger


Materials needed:
Hook:  TMC 206BL sizes #16-20.
Weight:  1.5mm tungsten or brass bead, black.
Thread:  Tan or olive 8/0 uni-thread.
Tail:  Blue dun hackle fibers.
Body:  Olive goose biot.
Wing:  Natural colored CDC feathers.
Wing case:  CDC feathers stripped.
Thorax:  Olive gray superfine dubbing.


Put your bead on your hook and start your thread.
Tie in your tail.











Trim the tag ends off.










Tie in your goose biot by the tip, and wrap your thread forward.

I put some wax on the goose biot before I tie it in. It's easier to work with that way.







Wrap your goose biot forward, and tie it off.

I put a coat of super glue on the body to make the goose biot more durable.









Select two CDC feathers of similar size.











Tie in the tips of the CDC and trim the tag ends.

You can tie them in at any length.  You will be trimming them to length later anyway.








Repeat with the tag ends you just cut...











Strip all of the fibers off the tag ends of your CDC feathers.










Tie them in side by side, just behind the wing.











Dub your thread with some olive gray superfine dubbing....















...and build up a thorax











Make one wrap of thread over the top of the bead so you are at the eye of the hook.










Split your CDC wing evenly so there is the same amount on both sides.  Then fold your stripped CDC wingcase over the thorax and the bead.  Tie them off just behind the eye of the hook.




















Trim the wingcase, and whip finish.

Trim your wings to length.  They should be no longer than the body.

I apply a bit of super glue to the wingcase to hold it in place.











Wednesday, December 26, 2012

Barr's emerger


Materials Needed:
Hook:  TMC 2487 size #18-24
Thread:  Black 8/0 uni-thread
Tail:  Black hackle fibers
Body:  Olive dubbing
Thorax:  Black peacock dubbing
Wingcase:  Black hackle fibers
Legs:  Black hackle fibers

Place your hook in the vise.











Start your thread.











Select some black hackle fibers.

No need to measure your tail on this pattern, you will be trimming them later anyway.









Tie in your tail. Do not trim the tag end of the hackle fibers.










Dub some olive dubbing onto your thread.















Wrap your dubbing forward over the hackle fibers.






















Pull back the hackle fibers and wrap a few thread wraps in front of them to hold them in place.










Dub some black peacock dubbing onto your thread, and  build up a thorax.










Fold over a clump of hackle fibers from the middle, leaving about 3-4 tag ends on either side to act as legs, as shown.

Tie down the hackle fibers, and whip finish.

Trim the legs on both sides to about the length of the hook shank.

Trim the tail to about the length of the hook shank as well.



Sunday, December 16, 2012

RS2 Emerger


I fish this as my bottom fly, usually with something heavier ahead of it.  You will get strikes at the very end of a dead drift, as your line tightens, and the fly rises in the water.

Materials Needed:
Hook:  TMC 101 size #20-24
Thread:  Grey Uni Thread 8/0
Tail:  4-8 blue dun hackle fibers
Wing:  White antron yarn

Put your hook in the vise.  I am using a size #22.











Start your thread, and work your way back evenly to the hook bend.










Select a few fibers from some blue dun hackle.











Tie in your hackle fibers to create a tail.











Clip the tag ends of the hackle fibers, and wrap your thread forward.  Wrap as evenly as possible.










Tie in some antron yarn.  Be sure to leave enough space to build a head without crowding the eye of the hook.









Clip the tag end of the antron yarn, and wrap a few thread wraps behind the yarn.










Wrap a few wraps in front of the yarn to build up a head slightly bigger than the body.










Trim the yarn to a length of about the hook gap.











Whip finish, and apply head cement.












Wednesday, October 24, 2012

How to tie the WD-40 emerger.


This is a very popular pattern in the western United States.  It was originally tied to imitate an emerging midge, but has proved effective as a BWO emerger as well.  I often fish this fly as a dropper off a dry fly or a nymph.

Material needed:
Hook:  Any standard emerger hook (I am using a TMC 2487) size #16-24
Thread:  Olive UTC 8/0
Tail:  Mallard flank dyed yellow to look like wood duck.
Thorax:  fine olive dubbing.
Wingcase:  Mallard flank dyed yellow.

Start your thread about halfway down the shank.











Select some fibers off your mallard flank.

I keep the fibers on the feather until I have them secured to the hook shank.  I do this so if I mess up, I can just re-even the fibers and start over without wasting materials.






Secure the fibers to the hook, and cut the fibers from the steam of the feather close to the stem.










Wrap your thread forward, keeping the mallard flank fibers on the top of the hook shank.

Be sure to leave enough room behind the eye of the hook.







Fold your mallard flank back over the hook shank and tie it down.










Dub some fine olive dubbing onto your thread.  Use a dubbing slightly darker than your thread if possible.














Build up a thorax with your dubbed thread.











Fold your mallard flank wing case over the thorax and tie it down.










Whip finish, and apply head cement.